ApexCore Technical Services L.L.C.
Tilal Al Ghaf, Dubai

Staircase feature wall with a 30° diagonal block - villa

Supply, workshop cutting and installation of a WoodUpp Akupanel feature wall in Rustic Grey Oak (Warm Grey felt) above a staircase - 1300 × 2200 mm, cut to our drawing with a 30° diagonal block of 29 slats with ends cut at 60°, End Lamella framing and dividers between the zones, and every panel joint placed on a felt gap.

Dark oak acoustic slat panel framed on the wall above a staircase, with a diagonal block of slats in the upper right
Front view of the finished panel - a column of vertical slats on the left, a diagonal block at the top right and shorter vertical slats below it
Front elevation drawing of the panel with its dimensions, the 30° angle and the slat zones
Close view of the oak veneer slats, the grey felt between them and the mitred corner of the frame
The feature wall seen from the bottom of the staircase, lit by a wall light
The same staircase wall before the work, plain and empty

Discuss your project

Discuss Your Finishing Project

Share the location, the surfaces and any drawings or photos. We will confirm whether the scope fits our licence and advise the next step.

Site assessments are chargeable; the fee is credited against the project if you proceed with ApexCore. Terms are confirmed in writing before the visit.

Discuss Your Finishing Project →Request a Site Assessment →